Description
If your bar is really large and thriving, you’ll need this three-section Keg Direct Draw Refrigerator with 32.37 cubic feet of capacity to hold (6) half barrels of beer. The exterior is covered in a textured black vinyl laminate. With a galvanized steel interior and stainless steel floor, it’s rugged enough to carry your kegs. The counter-top is also made of stainless steel, and has two draft arms. The cabin is insulated by 1-3/4 inch polyurethane foam. Self-contained refrigeration is side mounted in a removable panel. The compressor slides out readily to allow for cleaning and maintenance. Environmentally-friendly R-134A refrigerant is used with the refrigerator. An electrically timed air defrost keeps your unit in good working order. All of the doors are locking, with recessed handles, and snap-in magnetic gaskets. Door frame heaters thwart the build-up of condensation. There’s interior lighting which has its own power switch, so you can use it when you need it and then turn it off to save energy. The temperature range is from 33 to 41F, and is operated by push buttons and monitored by a microchip. You can check its accuracy on the digital display. Everest offers a 3 year warranty on parts & labor, 5 year warranty on electrical components, and 10 year warranty on the compressor. Specifications
Keg Direct Draw Refrigerator, three-section, 32.37 cu. ft. cap
(6) half barrels, rear mounted refrigeration system, stainless steel floor
Textured black laminated exterior, 304 s/s countertop, galvanized steel interior
89-1/4″L x 27″D x 37″H
115v/60/1, 1/3 HP, 4.5 amps, NEMA 5-15P
ETL, ETL Sanitation, NSF
WARNING: Attention California Residents – Prop 65 Warning
Reviews
There are no reviews yet.